Fast answer: the simplest way to estimate body fat percentage at home is the U.S. Navy method. You measure your height, neck and waist (plus hips for women) with a soft tape, then plug the numbers into a logarithmic formula. A 178 cm man with a 90 cm waist and a 38 cm neck comes out at about 20% body fat. Multiply your weight by that percentage to get fat mass, and subtract it from your weight to get lean mass. The result is an estimate, not a medical measurement, but it is far more useful than weight alone when you track progress over time.

This guide walks through the formula step by step, shows complete worked examples in centimetres and inches, explains how body fat differs from BMI, and covers the common measuring mistakes that throw the number off. If you only need a quick weight-to-height check, our BMI calculator is faster; if you want to know what to eat once you know your body composition, use the calorie calculator.

What body fat percentage actually measures

Body fat percentage is the share of your total body weight that is fat tissue. Everything else, including muscle, bone, organs, water and connective tissue, is grouped together as lean body mass (sometimes called fat-free mass). Two people can weigh exactly the same and have the same height, yet one may carry far more muscle and far less fat than the other. That is why body fat percentage is often a better progress indicator than the bathroom scale.

Some fat is essential. It cushions organs, stores energy, insulates the body and helps produce hormones. Women naturally carry more essential fat than men, which is why every reference chart has separate ranges for each sex. The goal of calculating body fat is not to drive the number as low as possible, but to understand where you are and to see whether changes in your weight come from fat, from muscle, or from water.

Body fat percentage vs BMI

Body mass index divides your weight by the square of your height. It is quick and needs no tape measure, which is why doctors and insurers use it as a screening tool. Its big weakness is that it cannot tell muscle from fat. A muscular hockey player and a sedentary office worker of the same height and weight receive the same BMI. Our guide on how to calculate BMI explains the formula in detail.

The Navy method adds waist and neck measurements, which brings fat distribution into the picture. Waist circumference in particular tracks abdominal fat, which is the type most often associated with health risk. Using both numbers together gives you a fuller picture than either one alone.

The U.S. Navy body fat formula

The formula was developed for military fitness screening and has become the most widely used tape-measure method. It uses base-10 logarithms (the LOG key on a calculator, or =LOG10() in a spreadsheet).

Metric formula (all measurements in centimetres)

  • Men: Body fat % = 495 / (1.0324 − 0.19077 × log10(waist − neck) + 0.15456 × log10(height)) − 450
  • Women: Body fat % = 495 / (1.29579 − 0.35004 × log10(waist + hip − neck) + 0.22100 × log10(height)) − 450

Imperial formula (all measurements in inches)

  • Men: Body fat % = 86.010 × log10(waist − neck) − 70.041 × log10(height) + 36.76
  • Women: Body fat % = 163.205 × log10(waist + hip − neck) − 97.684 × log10(height) − 78.387

Both versions give practically the same answer, so pick the units you measured in. If you measured in inches but want to work in metric, convert first with our metric and imperial unit converter (1 inch = 2.54 cm).

How to take the measurements correctly

The formula is only as good as the tape readings. A one-centimetre error on the waist can move the result by roughly a full percentage point, so consistency matters more than anything.

  1. Height: stand barefoot against a wall, heels together, and mark the top of your head with a flat object such as a book.
  2. Neck: measure just below the larynx (Adam’s apple), with the tape sloping slightly downward toward the front. Do not flare the neck.
  3. Waist (men): measure horizontally at the level of the navel, at the end of a normal exhale, without sucking in.
  4. Waist (women): measure at the narrowest point of the natural waist, usually a little above the navel.
  5. Hips (women): measure around the widest part of the buttocks, with feet together.

Use a flexible, non-stretch tape. Keep it snug against the skin but not compressing it. Take each measurement twice and average the readings. For tracking, measure at the same time of day, ideally in the morning before eating, because food and fluid can change the waist reading.

Worked example 1: a man in metric

Marc is 178 cm tall, his waist at the navel is 90 cm and his neck is 38 cm. He weighs 82 kg.

  1. Waist minus neck: 90 − 38 = 52 cm. log10(52) = 1.7160.
  2. log10(height): log10(178) = 2.2504.
  3. Denominator: 1.0324 − (0.19077 × 1.7160) + (0.15456 × 2.2504) = 1.0324 − 0.3274 + 0.3478 = 1.0529.
  4. 495 / 1.0529 = 470.1.
  5. 470.1 − 450 = about 20.2% body fat.

Fat mass is 82 kg × 0.202 = 16.6 kg. Lean mass is 82 − 16.6 = 65.4 kg.

Worked example 2: a woman in metric

Julie is 165 cm tall. Her waist is 75 cm, her hips are 100 cm and her neck is 33 cm. She weighs 66 kg.

  1. Waist + hip − neck: 75 + 100 − 33 = 142 cm. log10(142) = 2.1523.
  2. log10(165) = 2.2175.
  3. Denominator: 1.29579 − (0.35004 × 2.1523) + (0.22100 × 2.2175) = 1.2958 − 0.7534 + 0.4901 = 1.0325.
  4. 495 / 1.0325 = 479.4.
  5. 479.4 − 450 = about 29.4% body fat.

Her fat mass is 66 × 0.294 = 19.4 kg and her lean mass is about 46.6 kg.

How to read your result

There is no single official cut-off for healthy body fat, and different organizations publish slightly different ranges. A commonly used fitness reference chart groups results roughly as follows:

  • Essential fat: about 2–5% for men, 10–13% for women
  • Athletes: about 6–13% for men, 14–20% for women
  • Fitness: about 14–17% for men, 21–24% for women
  • Average: about 18–24% for men, 25–31% for women
  • Higher than average: about 25% and up for men, 32% and up for women

Read these bands as general orientation only. Age, ethnicity, genetics and training history all influence where a person naturally sits. Body fat also tends to rise gradually with age even when weight stays stable, because muscle mass declines unless it is trained. If a result worries you, a family doctor can put it in context with blood pressure, blood work and other health markers.

Using fat mass and lean mass to set goals

Knowing lean mass lets you set a realistic target weight. Suppose Marc wants to reach 16% body fat without losing muscle. His lean mass is 65.4 kg. At 16% fat, lean mass makes up 84% of total weight, so the target weight is 65.4 / 0.84 = 77.9 kg. That means losing about 4 kg of fat, not the 10 kg he might have guessed from the scale.

The general formula is: target weight = lean mass / (1 − target body fat %). Once you have a target, our article on how many calories you should eat a day explains how BMR and TDEE turn that goal into a daily calorie budget. A modest deficit combined with strength training gives the best chance of keeping lean mass.

Other ways to measure body fat

The Navy method is free and repeatable, but it is not the only option. Each method has its own trade-offs:

  • Skinfold calipers: a trained person pinches skin folds at three to seven sites. Accurate in skilled hands, inconsistent when self-administered.
  • Bioelectrical impedance (smart scales): a small current estimates body water and therefore lean mass. Very sensitive to hydration, meals and exercise, so readings can swing from day to day.
  • DEXA scan: an X-ray based scan that maps fat, lean tissue and bone. Considered a reference method, but it requires a clinic and is usually paid out of pocket.
  • Hydrostatic weighing and air displacement: lab methods based on body density. Accurate but rarely accessible outside research or sports facilities.

Whatever method you choose, stick with it. Comparing a smart-scale reading to a Navy tape result is like comparing two different rulers. The trend over weeks and months from one consistent method is what really matters.

Common mistakes that skew the result

  • Measuring the waist at the wrong spot. Men should use the navel; women the narrowest point. Moving the tape a few centimetres changes everything.
  • Pulling the tape too tight. Compressing skin lowers circumference and makes body fat look lower than it is.
  • Mixing units. Using the metric formula with inch measurements produces nonsense. Keep every input in the same unit.
  • Using natural log instead of log10. Spreadsheet LN() is not the same as LOG10(). The formula requires base 10.
  • Tracking too often. Daily changes are mostly noise from water and digestion. Every two to four weeks is enough.

Limits of the Navy method

Tape-measure formulas were built from population averages. They work well for most adults, but they can overestimate body fat in people with a very thick neck relative to their waist, such as some strength athletes, and can be less reliable at the extremes of very lean or very high body fat. They are also not designed for children, teenagers still growing, or pregnant women; for pregnancy-related tracking, see our pregnancy due date calculator and follow your health professional’s advice instead. Treat the number as an estimate within a few percentage points and focus on the direction it moves.

Frequently asked questions

Is the U.S. Navy body fat method accurate?

For most adults it lands within a few percentage points of lab methods, which makes it good enough for tracking progress. Its main value is consistency: the same person measured the same way will see real changes over time.

Why does the formula for women include the hips?

Women tend to store more fat around the hips and thighs. Adding hip circumference lets the formula capture that distribution, which a waist measurement alone would miss.

Can I calculate body fat from BMI?

Some formulas estimate body fat from BMI, age and sex, but they inherit BMI’s weakness of ignoring muscle mass. A tape-measure method is usually more informative for active people.

How often should I measure my body fat?

Every two to four weeks is a good rhythm. Measure at the same time of day, under the same conditions, and look at the trend rather than a single reading.

Does body fat percentage change with age?

It often rises slowly with age as muscle mass declines, even if weight stays the same. Regular strength training and adequate protein help limit that shift.

Is a lower body fat percentage always better?

No. Going below essential fat levels can disrupt hormones and health. Aim for a range that you can maintain comfortably, and talk to a health professional before pursuing very low targets.

This article provides general information only and is not medical advice. For personal health decisions, consult a qualified health professional.