The area of a circle is π × r², and its circumference (the distance around it) is 2 × π × r, where r is the radius and π is about 3.1416. If you know the diameter instead, divide it by 2 to get the radius, or use circumference = π × d directly.

Quick answer: a circle with a 5 cm radius has an area of about 78.54 cm² and a circumference of about 31.42 cm.

Key terms

  • Radius (r): distance from the centre to the edge.
  • Diameter (d): distance across the circle through the centre; d = 2r.
  • Circumference (C): the perimeter of the circle.
  • π (pi): the ratio of circumference to diameter, about 3.14159.

The formulas

You want From radius From diameter
Area A = πr² A = πd² ÷ 4
Circumference C = 2πr C = πd

Example 1: area from the radius

A round table has a radius of 0.6 m.

  • A = π × 0.6² = 3.1416 × 0.36 = 1.13 m².
  • C = 2 × 3.1416 × 0.6 = 3.77 m around the edge.

Example 2: comparing pizza sizes

Is one 16-inch pizza bigger than two 10-inch pizzas? Pizza sizes are diameters.

  • 16-inch: π × 8² ≈ 201 in².
  • Two 10-inch: 2 × π × 5² ≈ 157 in².

The single 16-inch pizza has about 28% more food. Area grows with the square of the radius, so a small increase in diameter adds a lot of area. To compare price per square inch, see our guide to comparing unit prices.

Working backward

Radius from the circumference

r = C ÷ (2π). If a tree trunk measures 188 cm around, r = 188 ÷ 6.2832 ≈ 29.9 cm, so the diameter is about 60 cm.

Radius from the area

r = √(A ÷ π). For a circular patio of 20 m², r = √(20 ÷ 3.1416) = √6.37 ≈ 2.52 m.

Practical uses

  • Landscaping: the area of a round flower bed tells you how much mulch to buy; see our mulch, soil and gravel guide.
  • Construction: the area of a round column or sonotube is needed to calculate concrete; see our concrete calculator.
  • Fencing or edging: the circumference gives the length of edging needed.
  • Cooking: converting a recipe from a square pan to a round one.

Partial circles

  • Semicircle: area = πr² ÷ 2.
  • Quarter circle: area = πr² ÷ 4.
  • Sector of angle θ (degrees): area = πr² × θ ÷ 360; arc length = 2πr × θ ÷ 360.

For rooms with a curved bay or rounded section, add the partial circle to the rectangular area; our square footage calculator helps with the rest.

Units: don’t mix them

If the radius is in centimetres, the area is in square centimetres. To convert square units, square the conversion factor: 1 m² = 10,000 cm², and 1 ft² = 144 in².

Checklist

  • Identify whether you have the radius or the diameter.
  • Square the radius before multiplying by π for area.
  • Use π ≈ 3.1416 (or your calculator’s π key) for accuracy.
  • Express area in square units and circumference in linear units.
  • Round only at the end.

FAQ

Is 3.14 accurate enough for π?

For most everyday tasks, yes. For larger measurements, use 3.1416 or the π key to avoid rounding errors.

Why does doubling the radius quadruple the area?

Because area depends on r². Doubling r multiplies r² by 4.

How do I find the area if I only know the circumference?

Use A = C² ÷ (4π). A circle with a 100 cm circumference has an area of about 796 cm².

Conclusion

Two formulas cover nearly every circle problem: A = πr² and C = 2πr. Start by finding the radius, keep your units consistent and round at the end. From pizzas to patios, you can now measure any round shape with confidence.