Knowing how to calculate square footage is useful for flooring, painting, renting, buying a home or comparing apartments. The basic formula is simple, but real rooms are not always perfect rectangles. This guide covers rectangles, L-shaped rooms, triangles and circles, how to convert square feet to square metres, and the mistakes that lead to wrong estimates.
The Basic Formula
For a rectangle or square:
Square footage = length (ft) × width (ft)
Example: a bedroom that measures 12 ft by 14 ft has 12 × 14 = 168 sq ft.
If you measure in inches, divide each measurement by 12 before multiplying, or divide the final result in square inches by 144.
How to Measure a Room
- Use a tape measure or laser measure.
- Measure wall to wall at floor level, along the longest length and width.
- Round to the nearest inch, then convert to decimal feet (6 inches = 0.5 ft).
- Write down each measurement with a quick sketch of the room.
L-Shaped Rooms
Split the room into two rectangles, calculate each one, then add them.
Example: a main area of 12 ft × 14 ft plus an alcove of 8 ft × 6 ft:
- 12 × 14 = 168 sq ft
- 8 × 6 = 48 sq ft
- Total = 216 sq ft
Triangles
Area = base × height ÷ 2
Example: a triangular nook with a 10 ft base and 6 ft height: 10 × 6 ÷ 2 = 30 sq ft.
Circles and Half-Circles
Area = π × radius² (π ≈ 3.1416)
Example: a round area with a 10 ft diameter has a 5 ft radius: 3.1416 × 25 = 78.54 sq ft. A half-circle is half of that, 39.27 sq ft. For more circle formulas, see how to calculate the area and circumference of a circle.
Quick Reference Table
| Shape | Formula | Example | Result |
|---|---|---|---|
| Rectangle | L × W | 12 × 14 | 168 sq ft |
| L-shape | Sum of rectangles | 168 + 48 | 216 sq ft |
| Triangle | B × H ÷ 2 | 10 × 6 ÷ 2 | 30 sq ft |
| Circle | π × r² | 3.1416 × 5² | 78.54 sq ft |
Square Feet to Square Metres
Canada uses both systems, especially in real estate and renovation. The conversion is:
- 1 sq ft = 0.092903 m²
- 1 m² = 10.7639 sq ft
Example: 168 sq ft × 0.092903 = 15.61 m². Our metric vs imperial conversion cheat sheet has more everyday conversions.
Using Square Footage for Projects
Flooring
Add a waste factor, often around 5 to 10 percent depending on the material and layout, to cover cuts and mistakes. Diagonal patterns need more.
Paint
Paint uses wall area, not floor area. Use our room paint calculator guide to estimate litres or gallons.
Concrete, mulch and gravel
These need volume, not just area: multiply square footage by depth. See our concrete calculator and mulch, soil and gravel calculator.
Common Mistakes
- Mixing inches and feet in the same calculation.
- Forgetting closets and alcoves.
- Subtracting areas that should be included, or the reverse (for example, a kitchen island for flooring).
- Not adding a waste factor when buying materials.
- Confusing listing square footage (often measured to exterior walls) with interior usable space.
For more Canadian calculators and finance tools, also visit Calculator Online.
FAQ
How do I calculate square footage of a house?
Calculate each room or section separately and add them together, or measure exterior dimensions for gross area, depending on what you need.
Do stairs count in square footage?
It depends on the measurement standard used. For material estimates, measure stairs separately.
How many square feet is a 10 by 10 room?
10 × 10 = 100 sq ft, or about 9.29 m².
How do I calculate square footage in metres?
Multiply length by width in metres to get m², or convert square feet using 0.092903.