To know how much mulch, topsoil or gravel you need, multiply the area of the bed by the depth you want, using the same units, then convert the result to cubic yards, cubic metres or bags. In imperial units: square feet × depth in inches ÷ 324 = cubic yards.

Quick answer: a 10 ft × 12 ft garden bed covered with 3 inches of mulch needs 120 × 3 ÷ 324 ≈ 1.1 cubic yards.

The volume formula

Volume = length × width × depth. The trick is keeping units consistent:

  • Imperial: area in ft² × depth in inches ÷ 12 = cubic feet; divide by 27 for cubic yards (or use ÷ 324 in one step).
  • Metric: area in m² × depth in cm ÷ 100 = cubic metres.

If your bed is not a rectangle, find its area first; our square footage guide covers L-shapes, circles and triangles.

Recommended depths

Material Typical depth Notes
Mulch (bark, wood chips) 2 to 4 in (5 to 10 cm) Keep it away from stems and tree trunks
Topsoil for new lawn 4 to 6 in (10 to 15 cm) Compacts after watering
Garden soil for raised beds Full bed height Add 10 to 20% for settling
Decorative gravel 2 to 3 in (5 to 7.5 cm) Use landscape fabric underneath
Gravel base for patio or path 4 to 6 in (10 to 15 cm) Compacted in layers

These are common guidelines; follow the instructions for your project or supplier.

Example 1: mulch in cubic yards

Two beds: 4 ft × 20 ft and 6 ft × 10 ft, mulched 3 inches deep.

  1. Area: 80 + 60 = 140 ft².
  2. Volume: 140 × 3 ÷ 324 = 1.30 cubic yards.
  3. Order 1.5 yards to allow for uneven ground.

Example 2: topsoil in cubic metres

A new lawn area of 8 m × 12 m needs 10 cm of topsoil.

  1. Area: 96 m².
  2. Volume: 96 × 10 ÷ 100 = 9.6 m³.
  3. Add about 10% for settling: roughly 10.5 m³.

Converting to bags

Garden centres sell bagged mulch and soil by volume. Check the bag label; common sizes are expressed in litres or cubic feet.

Bag size Bags per cubic yard Bags per m³
2 cu ft 13.5 17.7
3 cu ft 9 11.8
25 L 30.6 40
50 L 15.3 20

For Example 1 (1.3 yd³), you would need about 18 bags of 2 cu ft. Beyond 2 or 3 cubic yards, bulk delivery is usually cheaper and easier.

Gravel by weight

Gravel and stone are often sold by the tonne. The weight per cubic metre depends on the type of stone and its moisture, so ask your supplier for their conversion factor rather than guessing. Multiply your volume by that factor to get the tonnage.

Useful conversions

  • 1 cubic yard = 27 cubic feet ≈ 0.765 m³
  • 1 m³ = 1,000 litres ≈ 1.308 cubic yards
  • 1 inch = 2.54 cm

For more, use our metric and imperial unit converter. If your project also involves a concrete slab, see our concrete calculator.

Checklist before ordering

  • Measure each area separately and add them up.
  • Choose a depth for each material.
  • Convert to the unit your supplier uses (yards, m³, bags or tonnes).
  • Add 5 to 10% extra, more for soil that will settle.
  • Check delivery access for a truck and where the pile can be dumped.

FAQ

How many square feet does a cubic yard of mulch cover?

At 3 inches deep, about 108 ft² (324 ÷ 3). At 2 inches, about 162 ft².

Should I remove old mulch first?

If the old layer is still thick, top it up with 1 to 2 inches instead of a full layer, to avoid smothering roots.

Why does soil seem to disappear after spreading?

Loose soil settles and compacts after watering and rain. Ordering a little extra covers this.

Conclusion

Calculating landscaping materials is simple: area × depth, converted to the unit you buy in. Use 324 as your shortcut for cubic yards in imperial, divide by 100 in metric, add a small margin, and you’ll order the right amount the first time.