Fast answer: percent error compares a measured value with a known true value: |measured − true| / |true| × 100. Percentage difference compares two values when neither is the reference: |a − b| / ((a + b) / 2) × 100. If a lab measures gravity at 9.6 m/s² against the accepted 9.81 m/s², the percent error is 2.14%. If two stores price the same item at $120 and $150, the percentage difference is 22.2%.

These formulas look similar to percent change, but each answers a different question. Mixing them up is one of the most common mistakes in school labs, business reports and news articles. This guide explains all four measures, when to use each one, and how to avoid the classic traps. For quick everyday percentages, our percentage calculator handles percent of a number, percent change and more.

The four measures at a glance

  • Percent error: how far a measurement or estimate is from an accepted true value.
  • Percentage difference: how far apart two values are when neither one is the reference.
  • Percent change: how much a value grew or shrank from an old value to a new one.
  • Percentage points: the simple arithmetic difference between two percentages.

The deciding question is always: what is the reference? If there is a true value, use percent error. If there is a before and after, use percent change. If there are two peers, use percentage difference. If both numbers are already percentages, think about percentage points.

Percent error

Formula

Percent error = |measured value − true value| / |true value| × 100

The vertical bars mean absolute value, so the result is always positive. Some science teachers keep the sign to show whether the measurement was too high or too low; in that case, drop the absolute value on the numerator and say so in your report.

Example 1: physics lab

A student measures the acceleration of a falling object at 9.6 m/s². The accepted value is 9.81 m/s².

  1. Difference: |9.6 − 9.81| = 0.21
  2. Divide by the true value: 0.21 / 9.81 = 0.0214
  3. Multiply by 100: 2.14%

Example 2: estimating a renovation

You estimated that a renovation would need 46 square metres of flooring. The installer measured 50 m². Percent error = |46 − 50| / 50 × 100 = 8%. That is a useful number to know before ordering material; our guide on how to calculate square footage helps reduce measurement errors in the first place.

Example 3: forecasting

A small business forecast monthly sales of $18,000; actual sales were $16,500. Percent error = 1,500 / 16,500 × 100 = 9.1%. Notice that the reference is the actual result, not the forecast.

Percentage difference

Formula

Percentage difference = |a − b| / ((a + b) / 2) × 100

Dividing by the average of the two values makes the result symmetric: it does not matter which number you call a or b. That is exactly what you want when comparing two peers, such as two quotes, two lab instruments or two cities.

Example: comparing two prices

Store A sells a vacuum for $120 and store B for $150.

  1. Absolute difference: |120 − 150| = 30
  2. Average: (120 + 150) / 2 = 135
  3. 30 / 135 = 0.2222, so the percentage difference is 22.2%.

If you are deciding where to buy, you may actually care about percent savings relative to the higher price, which is a different calculation: 30 / 150 = 20%. Our discount and sale price guide covers that case.

Percent change

Formula

Percent change = (new − old) / old × 100

Percent change has a direction. A positive result is an increase and a negative result is a decrease. Using the same prices as above:

  • From $120 to $150: (150 − 120) / 120 = +25%
  • From $150 to $120: (120 − 150) / 150 = −20%

The same two numbers produce +25%, −20% and a 22.2% percentage difference, depending on the question. This asymmetry explains why a 50% loss followed by a 50% gain does not bring you back to the start: $100 falls to $50, and a 50% gain on $50 only gets you to $75.

Percentage points

When both numbers are already percentages, saying the change in percent can be ambiguous. If an interest rate goes from 4% to 5%:

  • The change is 1 percentage point (5 − 4).
  • The relative change is 25% ((5 − 4) / 4).

Both statements are correct, but they sound very different. Journalists and central banks use percentage points (or basis points, where 1 percentage point = 100 basis points) to avoid confusion. When you read that a rate rose by 0.25, it almost always means a quarter of a percentage point.

Choosing the right formula

  • Lab result vs textbook value: percent error.
  • Estimate vs actual invoice: percent error, using the actual as the reference.
  • Two instruments measuring the same thing: percentage difference.
  • Price this year vs last year: percent change.
  • Unemployment rate from 6.1% to 6.5%: 0.4 percentage points (or 6.6% relative change).

Relative and absolute error

Percent error is a relative measure. Absolute error is simply |measured − true|, in the original units. Both matter. An absolute error of 1 mm is trivial when measuring a 3 m board (0.03%), but huge when machining a 5 mm part (20%). Reporting both gives the full picture.

Percent error across several measurements

In labs, you usually repeat a measurement several times. The common approach is to calculate the mean of the trials, then compute the percent error of the mean. For example, three readings of 9.62, 9.70 and 9.75 m/s² average 9.69, so the percent error is |9.69 − 9.81| / 9.81 × 100 = 1.22%. Our average calculator finds the mean, median and mode for any list of values.

To describe how spread out the trials are, use standard deviation rather than percent error. Precision (consistency between trials) and accuracy (closeness to the true value) are different properties: you can be very precise and still consistently wrong if an instrument is miscalibrated.

Common mistakes

  • Dividing by the wrong number. Percent error divides by the true value, never by the measured value.
  • Forgetting to multiply by 100. 0.0214 is a decimal; 2.14% is the percentage.
  • Using percent change when there is no before and after. Comparing two cities’ rents is a percentage difference situation.
  • Confusing percent and percentage points. Always say which one you mean.
  • Rounding too early. Keep full precision until the final step, then round to two decimals.
  • True value of zero. Percent error is undefined when the true value is zero; report the absolute error instead.

Doing it in a spreadsheet

  • Percent error: =ABS(B2-C2)/ABS(C2), formatted as a percentage, where B2 is measured and C2 is true.
  • Percentage difference: =ABS(B2-C2)/AVERAGE(B2,C2)
  • Percent change: =(C2-B2)/B2, where B2 is old and C2 is new.

Formatting the cell as a percentage multiplies by 100 automatically, so do not multiply by 100 in the formula as well.

Real-life scenarios, step by step

Scenario 1: checking a kitchen scale

A kitchen scale reads 492 g when you place a certified 500 g weight on it. Percent error = |492 − 500| / 500 × 100 = 8 / 500 × 100 = 1.6%. For baking, where ratios matter, an error of that size can change texture, so you might recalibrate or replace the scale. If you scale recipes up or down, our guide to ratios and proportions shows how to keep ingredients balanced.

Scenario 2: comparing two thermometers

Two thermometers in the same room show 21.4 °C and 22.6 °C. Neither is a certified reference, so use percentage difference: |21.4 − 22.6| / ((21.4 + 22.6) / 2) × 100 = 1.2 / 22 × 100 = 5.5%. A word of caution: percentages on temperature scales depend on where zero sits, so the same readings converted to Fahrenheit would give a different percentage. For temperatures it is usually clearer to report the absolute difference, here 1.2 degrees.

Scenario 3: a grocery bill that went up

Your weekly grocery bill moved from $180 to $198. Percent change = (198 − 180) / 180 × 100 = +10%. If it later falls back to $180, the change is (180 − 198) / 198 × 100 = −9.1%, not −10%, because the base is now larger. To compare package sizes fairly before checkout, the unit price guide is the better tool.

Scenario 4: a survey result that changed

Support for a project rose from 40% to 46% of respondents. That is a change of 6 percentage points, or a relative increase of 6 / 40 = 15%. Reporting only the relative figure makes the change sound larger; reporting only the points can hide how much the base moved. Good practice is to give both.

Significant figures and rounding

Your percent error should not look more precise than your measurements. If you measured a length to the nearest millimetre on a 250 mm object, reporting an error of 1.23456% suggests a precision you do not have. A common rule is to keep two or three significant figures in the final percentage, and to round only once, at the end of the calculation. When you average several trials before computing the error, keep every decimal in the intermediate steps.

Quick reference: which formula to use

When you face a new problem, ask three questions in order. First, is one of the values an accepted, true or actual value? If yes, use percent error and divide by that value. Second, is there a clear before and after, such as last year and this year? If yes, use percent change and divide by the earlier value. Third, are the two values equal peers with no reference? If yes, use percentage difference and divide by their average. Finally, if both numbers are already percentages, state the change in percentage points, and add the relative change if it helps the reader. Following this sequence avoids nearly every mix-up described above.

Frequently asked questions

Can percent error be negative?

With the standard absolute-value formula, no. Some instructors use a signed version to show whether a measurement was above or below the true value; check what your course expects.

What is an acceptable percent error?

It depends on the field. School labs often accept a few percent, while precision engineering may require far less than 1%. Your instructor or industry standard defines the tolerance.

Is percentage difference the same as percent change?

No. Percentage difference divides by the average of the two values and has no direction. Percent change divides by the old value and can be positive or negative.

What is a percentage point?

It is the arithmetic difference between two percentages. Going from 3% to 4% is a 1 percentage point increase, which is a 33.3% relative increase.

Why does the order matter for percent change but not percentage difference?

Percent change uses the starting value as the reference, so swapping the numbers changes the base. Percentage difference uses the average, which is the same either way.

This article provides general educational information. Follow the specific conventions required by your instructor, lab manual or industry standard.