Whether you are pouring a shed pad, a patio or a few fence posts, the first question is always the same: how much concrete do I need? Order too little and you end up with a cold joint or a second trip to the store; order too much and you pay for concrete you have to get rid of. This concrete calculator guide shows the formulas for slabs, footings and round holes, how to convert the result to cubic yards, cubic metres or bags, and how much extra to plan for.

The basic concrete volume formula

Concrete is sold by volume, so every calculation comes down to one idea:

Volume = length × width × thickness

The only trick is to use the same unit for all three measurements. Slab thickness is usually given in inches or millimetres, while length and width are in feet or metres. Convert the thickness first:

  • 4 inches = 4 ÷ 12 = 0.333 ft
  • 6 inches = 6 ÷ 12 = 0.5 ft
  • 100 mm = 0.10 m
  • 150 mm = 0.15 m

If you need to calculate the surface area first, our guide on how to calculate square footage covers rectangles, L-shapes and irregular rooms; the same logic applies outdoors.

Converting to cubic yards and cubic metres

Ready-mix suppliers in Canada usually quote in cubic metres, while many bag labels and older plans still use cubic feet or cubic yards. Keep these conversions handy:

From To Operation
Cubic feet Cubic yards Divide by 27
Cubic yards Cubic metres Multiply by 0.7646
Cubic metres Cubic yards Multiply by 1.308
Cubic metres Cubic feet Multiply by 35.31

For more everyday unit conversions, see our metric vs. imperial cheat sheet.

How much concrete for a slab

Imperial example

You want a 10 ft × 12 ft shed pad, 4 inches thick.

  • 10 × 12 × 0.333 = 40 cubic feet
  • 40 ÷ 27 = 1.48 cubic yards
  • Add 10% for waste and uneven ground: about 44 cubic feet, or 1.63 cubic yards

Metric example

A 3 m × 4 m patio, 100 mm thick.

  • 3 × 4 × 0.10 = 1.2 m³
  • Add 10%: about 1.32 m³

At this size, many people compare the cost of ready-mix delivery with bagged concrete. Ready-mix often has a minimum order or a short-load fee, so ask your supplier before deciding.

How much concrete for footings and walls

Strip footings, grade beams and short walls are just long rectangles. Use the same formula with the length of the run, the width of the footing and its depth.

Example: a footing 20 ft long, 16 inches wide (1.333 ft) and 8 inches deep (0.667 ft): 20 × 1.333 × 0.667 = 17.8 cubic feet, or about 0.66 cubic yards before waste. For a footing that goes around a rectangle, add up the four sides but avoid counting the corners twice.

How much concrete for post holes and round columns

For a cylinder such as a fence post hole or a sonotube, use:

Volume = π × radius² × depth

The radius is half the diameter. Example: a hole 10 inches in diameter and 4 feet deep.

  • Radius = 5 inches = 0.417 ft
  • 3.1416 × 0.417² × 4 = about 2.18 cubic feet per hole

The post itself takes up some space, so the real amount is slightly less. Multiply by the number of holes to get the total. For frost-protected footings, depth requirements depend on your local building code, so check with your municipality before digging.

How many bags of concrete do I need?

Bagged concrete is labelled with an approximate yield, which is the volume one bag produces once mixed. Yields vary by brand and product, so always read the bag. As a rough guide, an 80 lb bag of standard mix often yields about 0.6 cubic feet and a 60 lb bag about 0.45 cubic feet. Metric 30 kg bags commonly yield around half a cubic foot.

Number of bags = total volume ÷ yield per bag, rounded up.

  • Shed pad, 44 cubic feet ÷ 0.6 = 73.3, so 74 bags of 80 lb
  • One post hole, 2.18 cubic feet ÷ 0.45 = 4.8, so 5 bags of 60 lb

Seventy-plus bags is a lot of mixing by hand. As a rule, once a job needs more than about one cubic yard, ready-mix or a rented mixer starts to make sense. When comparing bag sizes and prices, a unit price calculation tells you which option is really cheaper per cubic foot.

How much extra concrete to order

Excavations are never perfectly level, forms bow slightly and some concrete always stays in the wheelbarrow or the truck chute. Common allowances are:

  • 5% for well-formed slabs on a compacted, level base;
  • 10% for typical DIY slabs and footings;
  • 15% or more for irregular holes or uneven ground.

Running short in the middle of a pour is far more costly than a few leftover bags, which you can often store for small repairs.

Common concrete calculation mistakes

  • Multiplying feet by inches without converting thickness first.
  • Forgetting thickened edges or deeper sections under a slab.
  • Using diameter instead of radius in the cylinder formula.
  • Ignoring the gravel base, which takes up depth in the excavation.
  • Rounding bag counts down instead of up.

If you like having a set of practical calculators for Canadian homeowners, you can also browse this collection of online calculators built for Canada.

FAQ

How much concrete do I need for a 10 x 10 slab?

At 4 inches thick, a 10 ft × 10 ft slab needs about 33.3 cubic feet, or 1.23 cubic yards, before waste. Add 5 to 10% to be safe.

How thick should a concrete slab be?

Four inches is common for patios, walkways and shed pads. Driveways and heavier loads often call for more. Follow your plans or local code.

How many 30 kg bags are in a cubic metre?

It depends on the product’s yield. Divide 1 m³ by the yield shown on the bag (converted to cubic metres) and round up.

Is it cheaper to mix concrete or order ready-mix?

For small jobs, bags are usually more practical. For larger pours, ready-mix tends to be cheaper and more consistent, but check minimum order and delivery fees.