Buying too little paint means a second trip to the store and a risk of mismatched colour. Buying too much leaves half-empty cans in the basement. The good news: figuring out how much paint you need takes just a tape measure and a few minutes of math. This room paint calculator guide shows the formula, the deductions for doors and windows, and worked examples in both square feet and square metres.
The paint calculation formula
Every paint estimate follows the same four steps:
- 1. Wall area = perimeter of the room × wall height
- 2. Paintable area = wall area − doors − windows
- 3. Total area to cover = paintable area × number of coats
- 4. Paint needed = total area ÷ coverage per can
If you need a refresher on measuring floors and walls, our guide on how to calculate the square footage of a room covers the basics, including L-shaped rooms.
Step 1: Measure the walls
Measure the length of each wall and add them together to get the perimeter. Then measure the height from floor to ceiling. In a rectangular room, the perimeter is simply 2 × (length + width).
Example: a bedroom 12 ft × 14 ft with 8 ft ceilings has a perimeter of 2 × (12 + 14) = 52 ft. The wall area is 52 × 8 = 416 sq ft.
Step 2: Subtract doors and windows
You do not paint over doors and windows, so remove them from the total. Measure each one if you can. If you just want a quick estimate, these approximate sizes work for most homes:
| Opening | Approx. area (sq ft) | Approx. area (m²) |
|---|---|---|
| Standard interior door | about 20–21 | about 1.9 |
| Average window | about 15 | about 1.4 |
| Patio door | about 40 | about 3.7 |
Our bedroom has one door and two windows: 416 − 21 − 30 = 365 sq ft of paintable wall.
Step 3: Multiply by the number of coats
Most repaints need two coats for even colour, especially when changing shades. A single coat may be enough when you repaint the same colour over a clean surface. New drywall usually needs a coat of primer first, which you calculate the same way.
Two coats on our bedroom: 365 × 2 = 730 sq ft.
Step 4: Divide by the coverage on the can
Every can lists its coverage on the label, and that is the number to use. Many interior wall paints state somewhere around 350 to 400 sq ft per US gallon (3.78 L, the standard large can in Canada), which is roughly 32 to 37 m². Textured walls, porous surfaces and dark-to-light colour changes all reduce real-world coverage.
Using 375 sq ft per can: 730 ÷ 375 = 1.95, so you need 2 cans of 3.78 L for the walls.
Metric example
A living room of 5 m × 4 m with 2.5 m walls has a perimeter of 18 m and a wall area of 45 m². Subtract one door (1.9 m²) and two windows (2.8 m²) for 40.3 m². Two coats give 80.6 m². If the label says 10 m² per litre, you need about 8 litres, which means two 3.78 L cans plus a small can, or three large cans if you want touch-up paint. Need to switch between feet and metres? Use our metric vs. imperial conversion cheat sheet.
Quick reference: paint for common room sizes
The table below assumes 8 ft walls, one door, one or two windows, two coats and about 375 sq ft per can. Treat it as a starting point and adjust for your own measurements.
| Room size | Approx. paintable walls | Two coats | Large cans (3.78 L) |
|---|---|---|---|
| 10 × 10 ft | about 285 sq ft | about 570 sq ft | 2 |
| 12 × 12 ft | about 350 sq ft | about 700 sq ft | 2 |
| 12 × 14 ft | about 365 sq ft | about 730 sq ft | 2 |
| 15 × 20 ft | about 500 sq ft | about 1,000 sq ft | 3 |
Don’t forget the ceiling and trim
A ceiling’s area is simply length × width, so our 12 × 14 ft bedroom has a 168 sq ft ceiling. Two coats need about 336 sq ft, which fits in one large can of ceiling paint. Trim, baseboards and doors are usually painted in a different finish; for a single room, a small 946 mL can is often enough.
Tips to avoid buying too much or too little
- Round up to the next can rather than down: a little left over is handy for touch-ups.
- Buy all cans from the same batch, or mix them together in a bucket for consistent colour.
- Compare small and large cans by price per litre. Our unit price calculator guide shows how.
- Add sales tax to your budget so the total at the checkout is no surprise.
Planning a bigger renovation and the budget that goes with it? The Canadian pay and budgeting calculators at CalculatorOnline.ca can help you see what fits in your paycheque.
Paint calculator FAQ
How much paint do I need for a 12 × 12 room?
With 8 ft walls, one door, one window and two coats, you need roughly 700 sq ft of coverage, which is about two 3.78 L cans of wall paint.
How many square feet does a gallon of paint cover?
It depends on the product, but many interior paints list about 350 to 400 sq ft per gallon. Always check the label on the can you buy.
Do I need primer?
Primer is recommended on new drywall, patched areas, stained surfaces and when making a big colour change. Some paints include primer, but a separate coat often gives better results on bare surfaces.
Should I subtract doors and windows?
Yes for an accurate estimate. In a small room the difference may not change the number of cans, but in large rooms with many openings it can save you a can.